Mass flow accuracy (Liquid): ±0.50% of rate (standard)±0.40% of rate (optional)
Mass flow repeatability (Liquid): ±0.25% of rate (standard)±0.20% of rate (optional)
Volume flow accuracy (Liquid): ±0.50% of rate
Volume flow repeatability (Liquid): ±0.25% of rate
Mass flow accuracy (Gas): ±0.75% of rate
Mass flow repeatability (Gas): ±0.50% of rate
Density accuracy (Liquid): ±0.01 g/cm³ (10.0 kg/m³) (standard)±0.003 g/cm³ (3.0 kg/m³) (optional)
Temperature accuracy: ±1 °C ±0.5% of reading
Sensor maximum working pressure: 1,450 psig (100 barg)
Meter approvals, calibrations, and certifications: • CSA• IECEx• NEPSI• ATEX
Available Outputs: Model 1500 : for applications requiring one flow rate variable ( in milliamp and a frequency/pulse outputModel 2500 : for applications requiring simultaneous monitoring of multiple flow variables in combinations of outputs (mill
Housing: Polyamide PA 6.6
Power: • Minimum 19.2 to28.8 VDC• 6.3 watts• Meets Installation (Overvoltage) Category II, Pollution Degree 2 requirements
Input/output signals: • One active 4–20 mA output• One active frequency output
HART: Bell 202 signal is superimposed on the primary milliamp output
Mounting options: Remote-mount control room only• Mounted on 35 mm rail• Rail must be grounded
Application types: • Continuous process control• Two-phase flow/entrained gas• Filling &dosing• Meter verification
Hazardous approvals: Suitable for non-hazardous environments only
Euro
US Dollar
