Micro Motion F-Series Coriolis Meter Consisting of F100P Sensor and 2500 Transmitter

Mass flow accuracy (Liquid): ±0.20% of rate (standard)±0.10% of rate (optional) Mass flow repeatability (Liquid): ±0.10% of rate (standard)±0.05% of rate (optional) Volume flow accuracy (Liquid): ±0.20% of rate (standard)±0.15% of rate (optional)±0.10% of rate (optional) Volume flow repeatability (Liquid): ±0.14% of rate (standard)±0.075% of rate (optional) Mass flow accuracy (Gas): ±0.5% of rate Mass flow repeatability (Gas): ±0.25% of rate Density accuracy (Liquid): ±0.002 g/cm³ (2.0 kg/m³) Temperature accuracy: ±1 °C ±0.5% of reading Sensor maximum working pressure: 6,250 psig (431 barg) Meter approvals, calibrations, and certifications: •CSA•IECEx•ATEX•Marine (U.S., U.K., Norway-Germany, France, and Japan)•Ingress Protection•EMC effects Output variables:  •Mass & volume flow •Net product content / flow •Temperature •Density •Concentration Local display: None Power:  •Minimum 19.2 to 28.8 VDC •6.3 watts •Meets Installation (Overvoltage) Category II, Pollution Degree 2 requirements Input/output signals:  •One active 4–20 mA output •One active frequencty output HART: Bell 202 signal is superimposed on the primary milliamp output Mounting options:  •Mounted on 35 mm rail •Rail must be grounded Application types:  •Continuous process control •Two-phase flow/entrained gas •Meter verification Hazardous approvals: Suitable for non-hazardous environments only