Micro Motion ELITE Coriolis Meter Consisting of CMF200L Sensor and 2500 Transmitter

Mass flow accuracy (Liquid): ±0.10% of rate (standard)±0.05% of rate (optional) Mass flow repeatability (Liquid): ±0.05% of rate (standard)±0.025% of rate (optional) Volume flow accuracy (Liquid): ±0.10% of rate (standard)±0.05% of rate (optional) Volume flow repeatability (Liquid): ±0.05% of rate (standard)±0.025% of rate (optional) Mass flow accuracy (Gas): ±0.35% of rate Mass flow repeatability (Gas): ±0.20% of rate Density accuracy (Liquid): ±0.0005 g/cm3 (±0.5 kg/m3) (standard)±0.0002 g/cm3 (±0.2 kg/m3) (optional) Density repeatability (Liquid): ±0.0002 g/cm3 (±0.2 kg/m3) (standard)±0.0001 g/cm3 (±0.1 kg/m3) (optional) Temperature accuracy: ±1 °C ±0.5% of reading Sensor maximum working pressure: 1,580 psig (109 barg) Meter approvals, calibrations, and certifications: •UL•CSA•IECEx•NEPSI•ATEX•Ingress Protection•EMC effects Output variables:  •Mass & volume flow •Net product content / flow •Temperature •Density •Concentration Local display: None Power:  •Minimum 19.2 to 28.8 VDC •6.3 watts •Meets Installation (Overvoltage) Category II, Pollution Degree 2 requirements Input/output signals:  •One active 4–20 mA output •One active frequencty output HART: Bell 202 signal is superimposed on the primary milliamp output Mounting options:  •Mounted on 35 mm rail •Rail must be grounded Application types:  •Continuous process control •Two-phase flow/entrained gas •Meter verification Hazardous approvals: Suitable for non-hazardous environments only