Rosemount™ Flame Simulator

The Rosemount Flame Simulator is available in three models to complement the self-testing capabilities of all Rosemount 975 Flame Detectors. The flame simulator emits UV and/or IR radiation in a unique pattern recognizable as fire by a Rosemount Flame Detector. This allows the flame detector to be tested under “real” fire conditions without the associated risks of an actual open flame. By simulating a fire that triggers the flame detector outputs, the flame simulator verifies the correct operation of the flame detector, performs an essential end-to-end loop test and verifies window lens cleanliness. The simulator allows remote testing of flame detectors, often located in difficult to access and/or classified hazardous areas (Zones 1 & 2). Temperature Range: -4 °F (-20 °C) to 122 °F (50 °C) Dimensions: 9 in (230 mm) x 7.3 in (185 mm) x 5.35 in (136 mm) Weight: 5.5 lb (2.5 kg) Certifications/Approvals: ATEX and IECEx:Ex II 2 G DEx db ib IIB + H2 T4 GbEx ib tb IIIC T135 °C Db-4 °F (-20 °C) to 122 °F (50 °C)This product is suitable for use in hazardous zones 1 and 2 with IIB + H2 gas group vapor present.UK CAThe Rosemount FS-UVIR-975 is approved per CSAE 21UKEX1171X:Ex II 2 G D Ex db ib op is IIB + H2 T4 GbEx ib op is tb IIIC T135 °C Db-4 °F (-20 °C) to 122 °F (50 °C)This product is suitable for use in hazardous zones 1 and 2 with IIB + H2 gas group vapor present.TR CU:The Rosemount FS-UVIR-975 Flame Simulator is in compliance with the standard TR CU 010/2011 per: 1EX db ib op is IIB + H2 T5 Gb X-20 °C ≤ Ta ≤ +50 °CFor more details, see TR CU certificate No. TR CU C-US.M ю 62.B.05535.InMetro:This device is in compliance with the standards ABNT NBR IEC 60079-0, ABNT NBR IEC 60079-1, ABNT NBR IEC 60079-11, ABNT NBR IEC 60079-28, ABNT NBR IEC 60079-31, and INMETRO decree No. 179 as of May 18th, 2010. Further details may be found on Certificate of Compliance No. UL-BR 17.0852XX.