Micro Motion H-Series Hygienic Coriolis Meter Consisting of H400S Sensor and 2400S Transmitter

Mass flow accuracy (Liquid): Up to ±0.05% of rate Mass flow repeatability (Liquid): Up to ±0.025% of rate Volume flow accuracy (Liquid): Up to ±0.05% of rate Volume flow repeatability (Liquid): Up to ±0.025% of rate Mass flow accuracy (Gas): Up to ±0.35% of rate Mass flow repeatability (Gas): Up to ±0.175% of rate Density accuracy (Liquid): Up to ±0.0005 g/cm³(±0.5 kg/m³) Temperature accuracy: ±1 °C ±0.5% of reading Sensor maximum working pressure: 1,450 psig (100 barg) Output variables: Mass & volume flowNet product content / flowTemperatureDensityConcentration Local display: Standard user interface with 2-line LCD panelTwo clips for HART/Bell 202 connections (requires removing transmitter housing cover)Two membrane pushbuttons for local operation (requires removing transmitter housing cover)Glass or plastic lens options Power: Self-switching AC/DC input, automatically recognizes supply voltage85–265 VAC, 50/60 Hz, 4 watts typical, 7 watts maximum18–100 VDC, 4 watts typical, 7 watts maximumComplies with low voltage directive 2006/95/EC per EN 61010-1 (IEC 61010-1) and Installation (Overvoltage) Category II, Pollution Degree 2 Input/output signals (analog output option): Channel A:One active 4–20 mA outputNot intrinsically safeChannel B (configurable), one of:One active or passive frequency outputOne active or passive discrete outputOne active or passive discrete input Input/output signals (PROFIBUS-DP option): Digital 2-way PROFIBUS-DP signal Input/output signals (DeviceNet option): Digital 2-way DeviceNet signal (Now Obsolete) HART: Bell 202 signal is superimposed on the primary milliamp outputHART communication is not available on PROFIBUS-DP and DeviceNet transmitter versions Mounting options: Field mount, integral with sensor Application types: Continuous process controlTwo-phase flow/entrained gasMeter verification Hazardous approvals: C1D2Zone 2