Mass flow accuracy (Liquid): ±0.10% of rate
Mass flow repeatability (Liquid): ±0.05% of rate
Volume flow accuracy (Liquid): ±0.10% of rate
Volume flow repeatability (Liquid): ±0.05% of rate
Mass flow accuracy (Gas): ±0.35% of rate
Mass flow repeatability (Gas): ±0.20% of rate
Density accuracy (Liquid): ±0.0005 g/cm3 (±0.5 kg/m3)
Density repeatability (Liquid): ±0.0002 g/cm3 (±0.2 kg/m3)
Temperature accuracy: ±1 °C ±0.5% of reading
Sensor maximum working pressure: 1,480 psig (102 barg)
Meter approvals, calibrations, and certifications: •UL•CSA•IECEx•NEPSI•ATEX•Ingress Protection•EMC effects
Output variables: Mass & volume flowNet product content / flowTemperatureDensityConcentration
Local display: Standard user interface with 2-line LCD panelTwo clips for HART/Bell 202 connections (requires removing transmitter housing cover)Two membrane pushbuttons for local operation (requires removing transmitter housing cover)Glass or plastic lens options
Power: Self-switching AC/DC input, automatically recognizes supply voltage85–265 VAC, 50/60 Hz, 4 watts typical, 7 watts maximum18–100 VDC, 4 watts typical, 7 watts maximumComplies with low voltage directive 2006/95/EC per EN 61010-1 (IEC 61010-1) and Installation (Overvoltage) Category II, Pollution Degree 2
Input/output signals (analog output option): Channel A:One active 4–20 mA outputNot intrinsically safeChannel B (configurable), one of:One active or passive frequency outputOne active or passive discrete outputOne active or passive discrete input
Input/output signals (PROFIBUS-DP option): Digital 2-way PROFIBUS-DP signal
Input/output signals (DeviceNet option): Digital 2-way DeviceNet signal (Now Obsolete)
HART: Bell 202 signal is superimposed on the primary milliamp outputHART communication is not available on PROFIBUS-DP and DeviceNet transmitter versions
Mounting options: Field mount, integral with sensor
Application types: Continuous process controlTwo-phase flow/entrained gasMeter verification
Hazardous approvals: C1D2Zone 2
Euro
British Pound
