The Flexim FLUXUS ST measures steam flow non-intrusively from the outside of the pipe, the portable acoustic measuring method proves to be impressive with its exceptionally high measuring dynamics, high sensitivity at very low flow velocities and independence to flow direction. Due to this large flow range (flow velocities up to 200ft/s), there is no need to reduce pipe diameter to fit an inline meter’s requirement of minimum flow velocity. Moreover, the non-intrusive measurement does not cause any pressure loss. The transducer mounts can be completely insulated to reduce any heat loss to the environment. FLUXUS ST has no moving parts. Therefore, FLUXUS ST is not subject to wear and tear and does not require any maintenance.
Accuracy: Measurement uncertainty of the measuring system (volumetric flow rate): ±0.3% of the measured value ±0.02 ft/sMeasurement uncertainty at the measuring point (volumetric flow rate): ±1… 3% of the measured value ±0.02 ft/s, depending on application
Repeatability: ±0.15% of reading, ±0.015 ft/s
Flow Channels: 2
Process Media: Saturated steam, superheated steam, liquids and gases, see technical specification for details
Process Temperature: max. 356 °F
Process Pressure: min. 44psi absolute
Pipe Size: 1,80 inch to 39,40 inch
Range: Flow Velocity Range: 0.03 ft/s … 200 ft/s (depending on pipe size and transducer)
Communication Protocol: Modbus RTU optional
System Configuration and Installation: please have your specific application tested for feasibility
US Dollar
British Pound
